Iskalni niz je ali predolg ali pa vsebuje preveč besed.
Prevodi: en > sl
51–100/532
conformity assessment procedure
51 Objavljeno
finance
WTO: Tehnične ovire v trgovini
Recognizing that developing countries may encounter special difficulties in the formulation and application of technical regulations and standards and procedures for assessment of conformity with technical regulations and standards, and desiring to assist them in their endeavours in this regard;
ob spoznanju, da se države v razvoju utegnejo srečati s posebnimi težavami pri oblikovanju in uporabi tehničnih predpisov in standardov ter postopkov za presojo skladnosti s tehničnimi predpisi in standardi in z željo, da se jim pri tem pomaga,
52 Objavljeno
finance
WTO: Tehnične ovire v trgovini
5.2.4 the confidentiality of information about products originating in the territories of other Members arising from or supplied in connection with such conformity assessment procedures is respected in the same way as for domestic products and in such a manner that legitimate commercial interests are protected;
5.2.4 da je treba tajnost podatkov o proizvodih, ki izvirajo z ozemelj drugih članic in so dani v zvezi s postopkom presoje skladnosti, spoštovati enako kot tajnost podatkov o domačih proizvodih ter tako, da so zaščiteni legitimni trgovinski interesi;
53 Objavljeno
finance
WTO: Tehnične ovire v trgovini
1.1 General terms for standardization and procedures for assessment of conformity shall normally have the meaning given to them by definitions adopted within the United Nations system and by international standardizing bodies taking into account their context and in the light of the object and purpose of this Agreement.
1.1 Splošni pojmi za standardizacijo in postopki za presojo skladnosti imajo običajno pomen, kot ga določajo definicije, sprejete v okviru sistema Združenih narodov in v mednarodnih organizacijah za standardizacijo, glede na njihovo naravo in v luči cilja in namena tega sporazuma.
54 Objavljeno
finance
WTO: Tehnične ovire v trgovini
12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members.
12.7 Članice v skladu z določbami 11. člena dajejo državam članicam v razvoju tehnično pomoč in s tem zagotavljajo, da priprava in uporaba tehničnih predpisov, standardov in postopkov za presojo skladnosti po nepotrebnem ne ovirajo razširitve in razdelitve izvoza članic držav v razvoju.
55 Objavljeno
finance
Ur. l. RS, št. MP 2009-24
The objectives of this Chapter are to facilitate the trade in goods between the Parties, and to increase their ability to identify, prevent and eliminate unnecessary barriers to trade caused by technical regulations, standards and conformity assessment procedures applied by either Party, while preserving the Parties' ability to protect public health, animals and plants.
Cilji tega poglavja so olajševanje trgovine s proizvodi med pogodbenicama ob krepitvi njunih zmožnosti za odkrivanje, preprečevanje in odpravljanje ovir pri trgovanju zaradi tehničnih predpisov, standardov in postopkov za ugotavljanje skladnosti, ki jih uporablja ena ali druga pogodbenica ob ohranjanju zmožnosti pogodbenic za varovanje rastlin, živali in javnega zdravja.
56 Objavljeno
finance
WTO: Tehnične ovire v trgovini
12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs.
12.4 Članice priznavajo, da članice države v razvoju kljub obstoječim mednarodnim standardom, smernicam ali priporočilom v svojih posebnih tehnoloških in družbenoekonomskih razmerah sprejemajo določene tehnične predpise, standarde ali postopke za presojo skladnosti, s katerimi želijo zavarovati domačo tehnologijo ter proizvodne metode in postopke, ki ustrezajo njihovim razvojnim potrebam.
57 Objavljeno
finance
WTO: Tehnične ovire v trgovini
10.7 Whenever a Member has reached an agreement with any other country or countries on issues related to technical regulations, standards or conformity assessment procedures which may have a significant effect on trade, at least one Member party to the agreement shall notify other Members through the Secretariat of the products to be covered by the agreement and include a brief description of the agreement.
10.7 Kadarkoli je članica dosegla sporazum s kako drugo državo ali državami o zadevah v zvezi s tehničnimi predpisi, standardi ali postopki za presojo skladnosti, ki bi lahko bistveno vplivali na trgovino, vsaj ena članica, ki je pristopila k sporazumu, po Sekretariatu sporoči drugim članicam proizvode, ki jih vključuje ta sporazum, skupaj s kratkim opisom sporazuma.
58 Objavljeno
finance
Ur. l. RS, št. MP 2004-1
(c) "technical specification": a specification contained in a document which lays down the characteristics required of a product such as levels of quality, performance, safety or dimensions, including the requirements applicable to the product as regards the name under which the product is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures.
(c) »tehnična specifikacija«: specifikacija, vsebovana v dokumentu, ki določa zahtevane značilnosti izdelka, kot je raven kakovosti, učinkovitosti, varnosti ali mer, vključno z zahtevami za izdelek glede imena, pod katerim se prodaja, izrazja, simbolov, preskušanja in preskusnih metod, embalaže, oznak ali označevanja ter postopkov ugotavljanja skladnosti.
59 Objavljeno
finance
WTO: Tehnične ovire v trgovini
5.9 Except in those urgent circumstances referred to in paragraph 7, Members shall allow a reasonable interval between the publication of requirements concerning conformity assessment procedures and their entry into force in order to allow time for producers in exporting Members, and particularly in developing country Members, to adapt their products or methods of production to the requirements of the importing Member.
5.9 Razen v nujnih primerih, omenjenih v sedmem odstavku, članice dopuščajo primeren časovni presledek med objavo zahtev v zvezi s postopki za oceno skladnosti in njihovim začetkom veljavnosti, da bi imeli proizvajalci v članicah izvoznicah, zlasti pa v članicah državah v razvoju, dovolj časa, da prilagodijo svoje proizvode oziroma proizvodne metode zahtevam države uvoznice.
60 Objavljeno
finance
WTO: Tehnične ovire v trgovini
When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement.
Pri obravnavi takih zahtev Odbor upošteva posebne probleme pri pripravi in uporabi tehničnih predpisov, standardov in postopkov za presojo skladnosti ter posebne razvojne in trgovinske potrebe članice države v razvoju kakor tudi stopnjo njene tehnološke razvitosti, ki ji morda preprečuje, da v celoti izpolnjuje obveznosti po tem sporazumu.
61 Objavljeno
finance
WTO: Tehnične ovire v trgovini
12.9 During consultations, developed country Members shall bear in mind the special difficulties experienced by developing country Members in formulating and implementing standards and technical regulations and conformity assessment procedures, and in their desire to assist developing country Members with their efforts in this direction, developed country Members shall take account of the special needs of the former in regard to financing, trade and development.
12.9 Med posvetovanji razvite države članice upoštevajo posebne težave, ki jih imajo članice države v razvoju pri pripravi in izvajanju standardov in tehničnih predpisov ter postopkov za presojo skladnosti, in z željo pomagati članicam državamv razvoju pri njihovih tovrstnih prizadevanjih, upoštevajo posebne potrebe teh držav v razvoju po financiranju, trgovini in razvoju.
62 Objavljeno
finance
WTO: Tehnične ovire v trgovini
5.4 In cases where a positive assurance is required that products conform with technical regulations or standards, and relevant guides or recommendations issued by international standardizing bodies exist or their completion is imminent, Members shall ensure that central government bodies use them, or the relevant parts of them, as a basis for their conformity assessment procedures, except where, as duly explained upon request, such guides or recommendations or relevant parts are inappropriate for the Members concerned, for, inter alia, such reasons as:
5.4 Če je potrebno zagotovilo, da so proizvodi v skladu s tehničnimi predpisi ali standardi in ko obstajajo ustrezne smernice ali priporočila, ki so jih izdali mednarodni organi za standardizacijo, ali pa so le-ta v sklepni fazi, članice zagotavljajo, da jih centralni vladni organi v celoti ali pa samo v ustreznih delih uporabljajo kot podlago za svoje postopke za presojo skladnosti, razen če so take smernice in priporočila ali njihovi deli neustrezni za te članice ob ustrezni obrazložitvi, med drugim iz razlogov, kot so:
63 Končna redakcija
pravo
CELEX: 32000L0009
submit the safety component to a conformity assessment procedure in accordance with Annex V, and
predložiti varnostni element v postopek presoje skladnosti v skladu s Prilogo V in
64 Končna redakcija
pravo
CELEX: 31999L0036
CONFORMITY ASSESSMENT PROCEDURES
POSTOPKI UGOTAVLJANJA SKLADNOSTI
65 Končna redakcija
pravo
CELEX: 31999L0036
Such valves and other accessories used for transport may be subject to a different conformity assessment procedure separate from that used for the receptacle or tank.
Ti ventili in drugi dodatki, ki se uporabljajo za prevoz, so lahko podvrženi drugačnemu postopku za ugotavljanje skladnosti, ločenemu od postopka, ki se uporablja za posodo ali cisterno.
66 Končna redakcija
finance
CELEX: 32002D0731
CONFORMITY AND SUITABILITY FOR USE ASSESSMENT PROCEDURES (MODULES)
POSTOPKI OCENJEVANJA SKLADNOSTI IN PRIMERNOSTI ZA UPORABO (MODULI)
67 Končna redakcija
pravo
CELEX: 31999L0036
This mark shall be visibly and immovably affixed and shall be accompanied by the identification number of the notified body which has performed the conformity assessment procedure on the receptacles and tanks.
Ta oznaka se pritrdi tako, da je vidna in je ni mogoče premakniti, spremlja pa jo identifikacijska številka priglašenega organa, ki je izvedel postopek za ugotavljanje skladnosti posod in cistern.
68 Končna redakcija
CELEX: 32004L0022
The identification number of the notified body concerned referred to in Article 11, if prescribed by the conformity assessment procedure, shall follow the "CE" marking and supplementary metrology marking.
Če je identifikacijska številka zadevnega priglašenega organa iz člena 11 predpisana s postopkom za ugotavljanje skladnosti, naj le-ta slediznaku "CE" in dodatni meroslovni oznaki.
69 Končna redakcija
DRUGO
"conformity assessment procedures" means those procedures set out in Annex IV, Part I;
"postopki za ugotavljanje skladnosti" pomenijo postopke, določene v delu I Priloge IV;
70 Končna redakcija
pravo
CELEX: 32000L0009
Member States shall notify the Commission and the other Member States of the bodies responsible for carrying out the conformity assessment procedure referred to in Articles 7 and in Article 10, specifying the field of competence of each body.
Države članice obvestijo Komisijo in druge države članice o organih, ki so odgovorni za opravljanje postopka presoje skladnosti iz člena 7 in člena 10, z opredelitvijo področja pristojnosti vsakega organa.
Prevodi: en > sl
51–100/532
conformity assessment procedure